Romanian companies at K 2016

DUCATEX 

 

Company Profile

DUCATEX S.A. is a modern and energetic developing company; the source of its success is the wide investment program, orga­nized management system, improving and maintaining a severe quality control policy based on developing the laboratory facili­ties, built-in customer service department ready to comply, in a flexible and quickly way, to the highest demands of the market, to a highly qualified staff continually upgrading their professional skills.

Over 75% of DUCATEX S.A. products are dedicated to export, the presence on the worlds markets being its verification of the high standards of products and competitive efficiency.

The company is producing rubber articles since 1970, developing his activity over a total area of 110.000 sqm of land and 70.000 sqm built area taking advantage of his own rail way station, power supply station and gas reduction station. Activity is developed over a total the production area for gaskets and compounds.

Starting with 1999 became a private company developing the huge production potentiality in a competitive manner for the fol­lowing products range.

 Our range of products

- Closed cell foam rubber

• 01 Raw materials, auxiliaries

• 01.04 Foams and intermediates

• 01.04.026 Closed cell foam rubber

- Parts made by compression moulding

• 02 Semi-finished products,parts and reinforced plastics

• 02.01 Processing technologies

• 02.01.007 Parts made by compression moulding

- Semi finished products of rubber

• 02 Semi-finished products,parts and reinforced plastics

• 02.04 Product groups

• 02.04.001 Semi finished products

• 02.04.001.12 Semi finished products of rubber

- Foam products

• 02 Semi-finished products,parts and reinforced plastics

• 02.05 Products

• 02.05.056 Foam products

---

DUCATEX S.A. (Hall 7, level 2 / B04)

Contact Details

Ana Ipatescu 44 Street,

077120 Jilava, Ilfov, Romania

Telephone +40 21 4570016

Fax +40 21 4570018

cornelia@ducatex.ro

www.ducatex.ro

---

ELECTROMAGNETICA 

Company Profile

ELECTROMAGNETICA is recognized as a traditional leading manufacturer and supplier of distribution and electricity metering equipment, LED lighting solutions, electric and electronic parts, metal and plastic injection parts, tools and molds, automotive parts, safety systems for rail traffic. It is also targeted towards green energy production and to technologies increasing energy efficiency.

Who we are Founded in 27 November 1930 under the name "Standard Electrica Romana" ELECTROMAGNETICA was established as a leading manufacturer of telecommunication equipment in Romania.

Currently ELECTROMAGNETICA is a privately owned company, listed on Tier I B.V.B.

ELECTROMAGNETICA is recognized as a traditional leading manufacturer and supplier of distribution and electricity metering equipment, LED lighting solutions, electric and electronic parts, metal and plastic injection parts, tools and molds, automotive parts, safety systems for rail traffic. It is also targeted towards green energy production and to technologies increasing energy efficiency.

All products are made according to European and national norms and standards. The products are designed and developed by company’s own research and design department and have a high degree of integration, thanks to the diversity of the manu­facturing technologies which the company owns.

Under the name of ELECTROMAGNETA BUSINESS PARK, the company offers rental services for the space in excess, managing over 32,000 square meters of rental space at its headquarters in Bucharest for offices, manufacturing, services and conference rooms. The occupancy rate is over 93%.

Future development of the company has in view a mix of comple­mentary activities that should provide long-term stability and development of related activities which allow the better use of existing resources.

Our range of products

- Parts made by injection moulding

• 02 Semi-finished products, parts and reinforced plastics

• 02.01 Processing technologies

• 02.01.010 Parts made by injection moulding

---

ELECTROMAGNETICA S.A. (Hall 7, level 2 / F04)

Contact Details

Calea Rahovei No 266-268, Sector 5, 050912 Bucharest, Romania

Telephone +40 21 404-2146

Fax +40 21 404-2148

liliana.gheorghe@electromagnetica.ro

http://www.electromagnetica.ro

---

PLASTOR 

Company Profile

PLASTOR S.A. offers you complete project management of plastic parts manufacturing:

• design of plastic parts
• design of injection moulds for plastic parts
• design of blow-molding molds for plastic parts
• injection moulds and blow-molding moulds for plastic parts manufacturing, dimensions within 1200x800x800 mm
• injection of thermoplastic parts out of: PE, PP, PPT, PP+FS, PA, PA + FS, ABS, ABS - PC, POM, PET, PBT, PET + FSPBT+PC and other materials, on machines between 50 and 1100 tones clamping force
• blow-molding (traditional and suction blow molding) of parts made out of: LDPE, HDPE, PPH, PPK, PA, PA + GF on machines between 5-30 liters
• 3D measurements for plastic parts
• painting, screen printing, pad printing, hot stamping for plastic parts
• finished product packaginging
• logistics and transportation

PLASTOR S.A. quality management system is certified by the German company DQS according to ISO 9001 and ISO TS 16949 standards.

Our range of products

Product categories

- Parts made by blow moulding

• 02 Semi-finished products,parts and reinforced plastics

• 02.01 Processing technologies

• 02.01.001 Parts made by blow moulding

- Parts made by injection moulding

• 02 Semi-finished products,parts and reinforced plastics

• 02.01 Processing technologies

• 02.01.010 Parts made by injection moulding

- Parts from engineering plastics

• 02 Semi-finished products,parts and reinforced plastics

• 02.04 Product groups

• 02.04.003 Technical parts

• 02.04.003.02 Parts from engineering plastics

-Injection and compression moulds

• 03 Machinery and equipment for the plastics and rubber industries

• 03.06 Moulds and dies

• 03.06.001 Injection and compression moulds

-Blow moulds

• 03 Machinery and equipment for the plastics and rubber industries

• 03.06 Moulds and dies

• 03.06.002 Blow moulds

---

Plastor S.A. (Hall 7, level 2 / C04)

Contact Details

Clujului str. 175, 410546 Oradea, Bihor, Romania

Phone +40 259 207148; Fax +40 259 470048

marketing@plastor.ro; http://www.plastor.ro

---

STEWO Plastic Prod. S.r.l. 

Company Profile

For more than 45 years, we deliver our clients the technical components made of plastic. In consequence, in the last few years, I’ve made a shift from production by injection of components to the system. Thus, the basis is no longer just sit high value technical component, but rather, a combination of these products through plugging and installation of cables and electrical and mechanical components. The above-average growth is our highly motivated employees, who enjoy continuing professional training.

For more than a decade, the second generation, will further enjoy the same quality. The premise of our success are quality, flexibility and remain confident. You trusted and therefore further from the “plastics in the best form”.

As an international supplier of electro-industrial and automotive, we smiled to the idea to set up a factory in a country with low prices. In 2003, we opened in Nasaud (Jud. Bistrita) a company identical in proportion of 100%. A short-term plan has helped us to be able to start injecting the product after only one year after I started with installation and storage of printed parts with buffer, followed by the construction of a machine shop. At that time I already have the ability to service the resulting shapes by injection.

Meanwhile, countless clients around the country and abroad are supplied by our company identical in Nasaud. Due to the existence of partners nearby, from which we supply is done with electrical cables and electronic components, I was able to build shareholder value that we have in front of customers. The advantages offered by a country with cheap labor force, see interesting effects on the prices in the following areas: Manual/activities that require time, without increasing the batch, injecting the components to be mounted.

Our range of products

Product categories

- Parts made by injection moulding

• 02 Semi-finished products,parts and reinforced plastics

• 02.01 Processing technologies

• 02.01.010 Parts made by injection moulding

- Printing

• 02 Semi-finished products,parts and reinforced plastics

• 02.02 Follow on treatment of plastics products

• 02.02.003 Printing

- Plastics products and parts for automotive

• 02 Semi-finished products,parts and reinforced plastics

• 02.03 Supplying

• 02.03.002 Plastics products and parts for automotive

- Plastics products and parts for electrical engineering

• 02 Semi-finished products,parts and reinforced plastics

• 02.03 Supplying

• 02.03.007 Plastics products and parts for electrical engineering

- Plastics products and parts for medical engineering

• 02 Semi-finished products,parts and reinforced plastics

• 02.03 Supplying

• 02.03.012 Plastics products and parts for medical engineering

- Plastics products and parts for optics/precision engineering

• 02 Semi-finished products,parts and reinforced plastics

• 02.03 Supplying

• 02.03.016 Plastics products and parts for optics/precision engineering

- Parts from engineering plastics

• 02 Semi-finished products,parts and reinforced plastics

• 02.04 Product groups

• 02.04.003 Technical parts

• 02.04.003.02 Parts from engineering plastics

---

STEWO Plastic Prod. S.r.l. (Hall 8a / F20)

Contact Details

Str. George Cosbuc 230, 425200 Nasaud, Romania

Telephone +40 263 361233

Fax +40 263 361268

info@stewo.ro; www.stewo.ro

This company is co-exhibitor of STEWO Kunststoffverarbeitung GmbH & Co. KG

---